Bambooizakaya.com

Metal roof insulation is a commonly found element in a lot of private and business building that uses this specific roofing metal. The insulation component helps to eliminate excessive noise and save energy. Even though metal roofing itself has been existed for long time, it is only in recent years that a good percentage of property owners incorporate the insulation. The installation of this feature itself is not really complicated. If you’re interested in DIY-ing the project, here’s a guide on how to install metal roof insulation.

Insulation Installation Guide on New and Existing Metal Roofing

Majority, if not actually all, structure of roofing requires proper insulation, and when it comes to metal roofs, there is no exception either. As stated above, plenty of residential and commercial buildings are equipped with insulation to decrease noise pollution and increase energy conservation. It is definitely worth to install the insulation of metal roof if you want a cozy, quite, and warm dwelling space.

Hiring a professional is what some homeowners prefer, but that doesn’t mean it is rare to find some of them install it by themselves. Whether you are going to install the insulation on an existing or new roof structure, you can follow the helpful guides on how to install metal roof insulation below.

Steps to install insulation for new metal roof:

1. Use and set plywood for the rood sheathing by placing it upstanding to the roof joist and fastening the nails into the roof structure.
2. Lay out building paper layers on top of the sheathing. Make sure you provide six inches distance between the layers and fasten it using staples or nails to prevent leaks and moisture.
3. Spray or set the foam insulation on the whole roof surface. Position the sheets to be near each other but not to the point of overlapping.
4. Seal the seams by using duct tape and to provide extra protection against leaks or moisture.
5. Install your metal roof panels on top of the insulation layer based on the instruction from the manufacturer.

Steps to install insulation for existing metal roof:

1. Check the metal roof’s underside from the building attic until you spot the plywood roof sheathing layer that upheld by framing platform. The angled and larger-sized beams are referred to as joists, while the horizontal and smaller-sized ones are referred to as purlins.
2. Locate the fiberglass batt insulation on any open space between the purlins and the sheathing that you can find. Note that you may create less effective insulation if you locate them over tightly, so try to fill the gaps loosely.
3. Use rigid foam insulation to conceal the extent of your roof sheathing. Make sure it fit first by cutting the sit into proper size and use adhesive or staples to fasten it to the place.

As long as you incorporate good-quality materials and appropriate equipment and tools, it is not actually hard to set insulation under the metal roofing. However, if you aren’t sure that you can execute the work properly even after reading the guide on how to install metal roof insulation provided above, then it’s highly recommended to get help from expert insulation installers than can ensure success and safety of the project.

Making sure the house has good air circulation not just through the windows is a must. Roof and attic insulation is also necessary to minimize heat in the home. Insulation is necessary to minimize heat. Here’s what you need to know about attic and roof insulation.

It’s no secret that the earth is warming day by day. Do you feel the same way? This event was caused by the depletion of the ozone layer in the Earth’s atmosphere. This will make the heat not only felt outside the room. Sometimes you can feel the warm air entering the house.

Well, here we have a solution for you to achieve cooler air temperatures with a simple DIY roof insulation. See explanation below.

What Is Roof Insulation?

Roof insulation is the installation of a material used to reduce heat from the roof of a house. The presence of this heat-absorbing material can make the room below cooler than usual.

Not only that, you can also reduce the impact of using an air conditioner (AC) and increase the energy efficiency of your home. The most common type of roof insulation is thermal aluminum foil.

When installed, this material reflects infrared rays and attenuates noise from outside the house, such as raindrops.

How To Install Roof Insulation For A House

Roof insulation can be done by installing it directly on top of the roof. However, if there is another layer under the roof that protects the room, this can be attached to it.

Tools needed include wire mesh, scissors, glue, roof insulation types of choice, and other construction equipment. The way roof insulation works is that when the heat of the sun hits the roof, it reflects and absorbs. Sun rays are absorbed by the roof and directed at the room.

However, with roof insulation installed, heat is quickly blocked and trapped in a hollow layer.

This prevents the room temperature from getting too hot or too cold.

6 Attic Insulation Options

1. aluminum foil

As mentioned above, aluminum foil is the best-selling and most widely used insulation roofing sheet. This species has a silver leaf form. The sheet consists of two main layers that work together in hot view.

First, the foil itself. This function reflects heat from the sun up to 97%, reduces room heat by up to 45%, and is considered audible up to 7 db. The second layer is an empty layer.

This grade includes three material options that can be used, namely polyethylene, bubble wrap and glass wool. The polyethylene material is better for reducing the noise of the rainwater in the sky, while the bubble bag material is better for reducing the hot temperature.

2. Polyester roof insulation

It turns out that in addition to being used to make a mixture as a clothing material, this plastic bottle can also be a very good heat absorber. The commonly used type is R3.5. This material is very light and safe for all environments, but it is relatively more expensive and the effect is not pleasant to the skin.

3. Material of bubble sheet

This type has the same characteristics and shape as aluminum foil. The only difference is on the surface in the form of overlapping circles.

4. Glass wool material

One of the best roofs in this house is made from fiberglass treated to form a wool-like layer.

Glass wool is commonly used as dampers in office buildings, music studios, factories and the like.

5. Foam roof insulation board.

Although this panel material is made of plastic, it is very effective at absorbing heat. Because it’s made up of plastic particles that are compacted and then filled with air again.

The advantage of this material is that the price is quite affordable, saving the budget.

After that, the installation process is also very simple, so it is more convenient. Size and thickness are also varied so that it can be adjusted as needed.

6. Polyurethane foam material

Polyurethane foam is a material that is also good at absorbing heat. This material has a slightly dense liquid texture that can absorb heat more strongly and does not fade easily when exposed to high or cold temperatures.

This material is great for a wide variety of roof designs including tile, asbestos, wood, metal, concrete and other materials. What is more interesting about this material is that it can be applied very easily by spraying the outer layer on different types of roof. Hope the above article can help you!

Although classified as an old type of air conditioner, Window AC is still used by various groups. Older AC windows have many advantages, but don’t get me wrong.

Air Conditioner (AC) windows are one of the most popular types of air conditioners in Indonesia. Of course, its popularity is not far from the advantages of Window AC itself. This is because when choosing an air conditioner, you must first look for quality and then for price. No one wants to buy an AC device that is expensive but of poor quality.

Advantages of Window Air Conditioner

Window air conditioner is a popular air conditioner, so let’s talk about the advantages of this type of air conditioner over other types. Let’s start!

1. Easy to install

The advantage of window air conditioners is that the installation process is simple. Even if you are not an expert, you can install it according to the attached manual.

Can you save more money by installing your own air conditioner so you don’t have to hire others?

2. Can be used for different time conditions

If you think you need to buy heating after window air conditioning, you are wrong. Using the HVAC system, the air conditioner can provide cold air in the summer and warm air in the winter.

3. No floor space required

As the name implies, window air conditioners do not require a floor and do not occupy a lot of space in the room. The air conditioner can be installed properly just by leaving a little space near the window.

4. Low cost

Window air conditioners are fairly cheap and reasonably priced. This is one of the advantages of window air conditioners that many people like. The cost of a window air conditioner depends on the brand, BTU capacity, and features provided by the device itself. You need to know the size of the room so that you can determine the correct BTU.

5. Energy Saving

As mentioned in the title, window air conditioners are energy efficient air conditioners. This is because you don’t have to spend a lot of money on maintenance and electricity. Your air conditioner is definitely energy efficient, especially when buying an air conditioner that has an Energystar certificate.

Disadvantages of Window Air Conditioner

Well, to be fair. You might also need to several disadvantages of using Window AC. Here are some disadvantages that you might have to consider before using Window AC.

• Since the air conditioner is installed in the window, light and natural air may not enter through the window. Installing window air conditioner is very difficult and requires a lot of energy as it requires drilling holes in windows and walls that are inefficiently large.
• Air conditioner selection is limited to the shape of the window model, so finding a suitable AC model can be difficult.
• This window AC also has advantages, but it is inefficient and this AC is rarely found. In addition, the somewhat cumbersome installation makes people lazy in choosing this air conditioner.

Well those are some advantages of the Window AC. If you are considering buying an air conditioner, you need to pay attention to the area of ​​the room and know in advance which type of air conditioner is suitable for installation. It is important to know the area of ​​the room, as the area of ​​the room is directly related to the PK (Paardekracht / PS) of the air conditioning system.

Why pay attention to PK when installing an air conditioner? Regarding power consumption, please adjust the power of the air conditioner according to the room. If the room is small and you are using an air conditioner with a large PK capacity, it will consume a lot of power.

For example, if the room is 10m2 and you are using AC PK, the room will feel cold, but it will use a lot of power. Also, if you use an air conditioner with a small PK capacity in a large room, it will take longer to cool.

Wall absorbers or so-called wall insulation can be attached to walls such as home walls, factory walls, office walls, and other buildings to adequately attenuate various noises that can occur. , A term for insulation that is fully damped.

Today, many large companies, factories, home remodeling, music studios, or various other commercial buildings and locations use wall-mounted dampers to keep the atmosphere comfortable and undisturbed by excessive noise.

Material for Wall Insulation to Reduce Noise

Good wall attenuator insulation should be made of polyester material and is eco-friendly as the soundproofing function is more efficient. Soundproofing material itself can be divided into two types: soundproofing material and sound absorbing material.

Do you think that the soundproofing material and the sound absorbing material are the same or different?

In the world of noise reduction, we often hear the word “silencer”. Is that the correct word?

Commonly known noise protection consists of adding a silencer to the room. Even if the use of the word silencer for soundproofing is not completely correct.

Soundproofing comes from the word sound and proofing. “Proofing” itself means reducing. Therefore, soundproofing means a material that reduces noise. Whether it’s reducing noise or reducing room echo.

Soundproofing Material

Soundproof material is a material that can block (block) the intrusion of sound into and out of the room. The wall made of soundproof material can withstand the intrusion of sound into other rooms, so there is no noise from the sound source in other rooms.

Insulation material is very heavy, non-porous, has a hard surface and is viscoelastic. Examples of soundproofing materials include Acourete Noise Armor, Red Brick, Iron Plate, and Acourete Paint EZ1.

Sound Absorbing Material

Next, the sound absorbing material will be explained. Absorbing here means absorbing sound from the sound source to reduce room noise.

Not all sound is absorbed by the absorber. When the sound hits the sound absorbing material, the sound is absorbed and partially transmitted. Therefore, if you need a sound-absorbing material that can reduce external noise so that it does not enter the room, use a sound-absorbing material instead. This is not appropriate. The absorber features a light, porous and soft surface. Examples of these materials include acurete board, follicle foam, rock wool, acolete fiber and so on.

As shown below, these two materials are often combined for good performance. However, the above two materials can be combined to obtain a good sound insulation partition wall system. Insulation must block incoming sound, and sound absorbers must absorb the remaining sound energy that is not blocked by the insulation. These combination will give the best result compared when you install only just one. However, note that installing those two combined will cost you a lot more money.

Well those are the deeper knowledge about the soundproofing material and sound absorbing material. If you are about to install wall insulation to reduce noise and etc., make sure you know the type of material that will be installed. Using correct material will enhance the proofing feature, or absorbing feature that will make your home or studio is protected and felt professional.

Currently, the price of air conditioners is quite high, but the impact of technological advances on air conditioner manufacturers could lead to portable air conditioners. Portable air conditioners have the same functionality as traditional air conditioners, but do not require a lot of space in terms of size, installation and price.

Reasons to Have Portable AC In Your House

Here are several reasons why you should switch to this portable air conditioner for your home needs.

1. Affordable

Although smaller in size than traditional alternating current, it generally has the same advantages as alternating current. In fact, portable air conditioners are very affordable. Current prices for portable air conditioners range from IDR 800,000 to IDR 2,000,000. The higher the price, the less energy a portable air conditioner uses. So you can save on your home’s electricity bill. Of course, there are differences in the functionality of portable air conditioners. Also, the higher the EER of a portable air conditioner, the cheaper the price of the air conditioner tends to be.

2. Good Dew Droplets Absorber

If you are using a portable air conditioner, the room will naturally become damp as it cools. Moisture usually leads to dew, so portable air conditioners have a special port to hold dew droplets. The floor does not get wet and it is enough to clean the special connections regularly.

In addition, some portable air conditioners have a display panel that adjusts the performance of the air conditioner using the room temperature setting option. You can set your own room temperature just like a traditional air conditioner. To use it, all you need is one outlet that can be plugged into a portable AC power source.

3. It’s Cheaper and Also Practical

Traditional air conditioning systems are generally large in size and require holes in the wall for installation. When using a portable air conditioner, it does not require a large area because it is smaller in size than a conventional air conditioner. In terms of price, portable air conditioners are inexpensive and easy to install and disassemble.

If you use this type of air conditioner, you don’t need to make a hole in the wall. The portable air conditioner can stand like a fan and move around as you like. The AC products currently on the market are box-shaped with an average height of 2834 inches. Thanks to its compact and non-permanent shape, it is definitely convenient to use when hosting an event at home.

For those who want to buy a portable air conditioner but don’t know which air conditioner to choose, some of these tips can be used. First, pay attention to the characteristics of the portable air conditioner you are looking for. Some of the features that need to be present are fan speed, temperature, and fan orientation settings.

Remember to pay attention to the waterways so that you don’t have to bother to prepare your own shelter. There may also be recommendations for specific AC brands of proven quality. Some brands have a good reputation, so quality is guaranteed. Also, make sure that your portable air conditioner is fully guaranteed to operate in the best possible condition in the event of damage and to avoid wasting time and money.

Many new homes are insulated with spray foam for energy efficiency and comfort benefits. At the same time, the owners of the existing homes decided to redevelop their attics, walls and spaces with spray foam to solve the annoying problems in the room and save money on their daily energy bills/month.

Spray foam is also a great choice for very good barns. Well today, we will explain about the term of foam insulation, how it works, what it’s made of, and so on. So relax, sit back and let’s know deeper all about spray foam insulation.

When researching insulation options for your project, you may come across many different types of insulation, including fiberglass, cellulose, and spray foam. You’ve heard about spray foam, but you don’t quite understand it or how it works exactly. Well, here’s some information about foam insulation we created just for you.

Spray Foam Insulation, What Is It?

Foam Insulation spraying is the act of insulating and air-blocking material that seals holes in floors, ceilings, and walls to resist air movement. This will also include the space around lights and electrical outlets, as well as where the walls gets in touch with doors and windows. Spray foam can be sprayed into open spaces, such as attics, new construction, rim braces and storage room.

It can also be used in existing homes, commercial buildings and barns. As long as the recess is open and has an entrance, spray foam is able to be applied. Spray foam will never loses the shape of it, it stays. It is different from the conventional insulation materials. This excellent spray foam will fill gaps and cracks during installation. It will not sag, compress, or settle as the time goes by.

Why Use Spray Insulation Foam?

There are many reasons you can use foam insulation, but why choose this kind of insulation? There are a number of reasons why you should use spray foam insulation. It is kind of excellent product of choice for homeowners, and this decision is often based on the merits of the material.

1. If you are paying expensive bill every year because your home can’t maintain a steady temperature, an air cushion created by spray foam might be helpful. It will seal the building envelope when it is used and applied in your home, so air can’t get into your house, nor can it. Your house is airtight with no leaks, which means your air conditioner and fireplace won’t run all the time. This will save you from expensive bill on monthly, or yearly basis.
2. The air cushion created by the spray foam also pulls the wind into your home. Anywhere air can leak, it will. The way the spray works, the spray gets into every single cranny and nook preventing that air movement. Another problem to keep in mind that spray foam can be fixed is water vapor condensation on the walls.
3. When the temperature from outside to inside has a big difference, when the two temperatures meet then condensation will form. This happens on walls with little or no insulation. This is a situation where the air cushion created by the foam insulation can promote the formation of water vapor. Condensation cannot form because it has created a barrier that prevents the air from the outside and the treated air inside from meeting.
4. One major problem homeowners face in the winter is ice dams. Ice dams will be formed when air freezes over a roof and heat loss from the attic will melt it, so it flows along the roof, creating an ice dam at the butt end of the roof in the gutter.
5. This is a circumstance where the air sealing created by the foam insulation spraying will prevent ice dams in the attic. The air that is treated in your home circulates in the attic. The insulation of the attic terrace prevents this hot air from escaping through the roof. Preventing the movement of air over it prevents ice dams.

In brief, you got many benefits from having good insulation in your home. If you have more budget, you can include foam insulation in your list of new home needs.

Closing

Well, those are the information about what is spray foam insulation, how it works and why you should use it. To summarize, if you are planning on creating a home which is comfortable, which protect you from any leak of annoying thing such as rainwater, snow, dew, noise, and many others, applying foam insulation is the best choice.

Air Conditioner is the one of the most important thing in an office right now. Not only that, AC also plays an important role in maintaining the temperature around the house as well, not just an office. When you have babies in the house, it is recommended to install AC to maintain the fresh air in the house and keep the temperature stable.

However, AC consumes too much electricity. This means that AC will cost you quite a lot of money per-month just for an electricity. Well, that is why, knowing how to save up some electricity to make the use of AC efficiently is important. Here’s how.

Placing The AC In A Closed Space

Placing the AC in a closed space is also one of the steps to save the power of the AC.

This is because when placed in an open room or open door, the motor needs to operate long enough to cool the room.

People definitely come and go, unless it’s a public place like an office. So, if you install AC in the house, make sure to close the door immediately after getting in or getting out.

Determine The AC Size That Fits The Room

The size of the AC should be the same as the room in which the air conditioner is installed. Do not prevent the AC capacity from being too small for optimal cold weather. Conversely, if the AC capacity is too large, of course, the power required will continue to increase.

Set The Temperature As Needed

The default temperature setting for the remote control is 20 ° C. This is because the engine can stop quickly if the temperature is too high. In order to start the compressor more frequently, it naturally requires more power at start-up than when the engine is running continuously.

However, this does not mean that the temperature cannot be lowered below 20 ° C. Buddy can use the lowest temperature to cool the room faster. If you feel cold later, just raise the temperature.

Perform Maintenance Every 3 Months

This is something that AC users usually take for granted or always forget. Just because the air conditioner is still cold does not mean that it is in good condition, even if it is time for maintenance. Regular cleaning of the AC not only prevents premature damage, but also saves power. The reason is that when alternating current is contaminated, it makes the machine difficult to operate and requires more power. It is recommended to wash the AC every 3 months for homes and every 2 months for offices.

However, if rapid contamination is tolerated in the AC area, for example on the side of the road, we recommend once every two months at home and once a month at the office.

Clean The Air Filter Once A Week

It is recommended that a friend wash the air filter indoors once a week. Not only does it help cool the air conditioner and save electricity, but it also keeps the air in the room clean and healthy.

The method is very easy. You can open the inner case at the top, then remove the filter and wash it with soap.