Tips To Unclog Standing Water in Garbage Disposal

Spread the love

You can unclog standing water in garbage disposal in an easy way. The garbage disposal is used in most homes to slice food particles into smaller pieces. It is important so that they will not clog the p-traps in the plumbing. You can unclog your garbage disposal in two ways.

Use pliers and a wrench.

The first way to unclog disposal is by using a broom handle and also a wrench. The tools are needed to loosen the rotor underneath the sink. You need to use a broom handle to get inside the disposal, and it allows you to twist the rotor from underneath the sink too. Most people suggest you use a tool rather than use your hand to clean the debris. When you use your hand, it can cause severe injuries to your hand.

Use a sink plunger

Second, you can get a solution for standing water in garbage disposal by using a sink plunger. For those of you who don’t know how to use a sink plunger correctly, you can follow the steps here.

  1. Placing the sink plunger over the garbage disposal drain is a good idea.
  2. Push the sink plunger up and down to get started. If you remove the plunger from the drain, the seal you’ve made will be broken, and you won’t be able to get the suction you need to free any debris.
  3. Before lifting the plunger, push it up and down at least 6 to 8 times. If the water in the sink drains, it’s safe to assume that any food particles have been displaced. If there is still standing water, you may need to repeat the steps multiple times.
  4. After this is finished and the water has receded, it is recommended that you run hot water through the disposal for up to three minutes to clean any leftover material from the drain.

unclog standing water in garbage disposal

The Next Step for Unclogging the Sink

Is the blockage in the sink still there? It could be a clog in the drain. Let’s have a look at the steps to resolving this.

  1. At the point where the curved portion straightens out and heads into the wall, disassemble the P-trap.
  2. Using a pair of slip-lock pliers, loosen the nut.
  3. Turn the curved section away from you after removing the nuts.
  4. Remove the curved section and empty it by loosening the other nut.
  5. If the blockage isn’t in this portion of the pipe, it’s most likely in the horizontal waste arm.

MAINTENANCE TO PREVENT CLOGS IN THE FUTURE

Using ice and kosher salt in your garbage disposal will aid in the removal of any loose debris from the canister’s serrated walls. By filling the disposal with ice and Kosher salt for 10 minutes, the debris (such as grease and starch) will harden owing to the ice. The ice and salt will remove the hardened debris from the canister serrations and be washed into and out of the pipes once the disposal is turned on.

You can try to unclog standing water in garbage disposal by taking some effective steps above now.